About this 3D model

Note: The mortise holes in this model are 5mm, and the tenons are 4.8mm; The mortise and tenon joints in the model do not have any gaps, which makes them susceptible to printing accuracy issues. It is highly recommended that you add supports and properly adjust your machine settings. Otherwise, it might be challenging to assemble the model; You need to insert the machine into the model before assembling it. Once the model is assembled, the machine cannot be removed or inserted ; You need to lift the AMS slightly when installing the filament; When assembling the mortise and tenon joints, you can place the frame on the ground, press down firmly with one hand, and insert the tenon with the other hand; AMS Lite desiccant box, printable with A1 Mini, using magnetic door opening Using the mortise and tenon method to connect Additionally, you will need: Acrylic sheets 200*470*5 mm, 2 pieces, 200*240*3mm, 2 pieces, 238*468*3mm, 2 pieces Magnetic strips 10*2mm, 10 meters Air tube connector PU-4, 4 pieces Color-changing silica gel desiccant Glue