About this 3D model

Boost Me Summary Inlet strainer for Neptunes Cor20 pump. I made it two pieces for easier, support-free printing. Make sure you flip the lid and print flat side down. Threads match pump. The holes are all just under 1/4 inch so that the tiny snails won't go through it. I had to deburr the inside bottom edge of the threaded hole because the first layer squashes a little. It's modeled using inches instead of millimeters, so you must convert it accordingly for slicing. Simplify3D prompts you and scales correctly. If your slicer thinks the model is in millimeters (it would be tiny), then scale it up 25-40%, and it should then be correct. Print Settings Printer: Bambu Lab P1S Rafts: No Supports: No Resolution: 0.2mm Infill: 15% Filament brand: Bambu Lab Filament color: Black Filament material: PTEG or PLA