About this 3D model

Primarily supports the use of portable monitors with a size of 17 inches or less in fixed scenarios. Currently only supports 75mm hole spacing vesa interfaces. ------------ Pay attention to the orientation of the white and orange parts where the monitor connects, the third image in the model picture shows the correct orientation. The height adjustment function has been upgraded, please refer to the model pictures and videos for the part installation position. ------------ The orientation has been readjusted and supports have been added, it can be printed directly, it is recommended to use 15% infill. For the hardware part, there are 2 M5 hex nuts, 2 M5x20mm screws, 4 M4x10mm screws to connect the monitor, it is recommended to use cup head socket screws. The base is connected with 2 M5 hex nuts and 2 M5x12mm screws. The step format file can be easily modified, if you want to have a detailed discussion, you can join my QQ group 440260982 ------------ A tablet stand has been added, the connecting hardware is 2 M5 hex nuts and 2 M5x12mm to 20mm screws. Installation direction refers to the pictures and videos. ------------ Updated version without using hardware parts, all 3D printed. https://makerworld.com/zh/models/122830 ------ Updated the printed M5 screws and nuts, optimized the printing direction, can be used temporarily. When printing M5 screws, set the XY outer contour size compensation to -0.1 in the slicing software.