About this 3D model

⚠️ Make sure your printer has a printing volume of at least 205x220x231mm to make sure you can print the files! (Bambulab A1, P1S and Ender3 are fine). For this print, having tight tollerances is crucial, if you are not sure if you can print print-in-place mechanisms, check the CALIBRATION FILE. This Object only supports the "tight" version (0,35mm tollerance). ⚠️ Non-manifold / floating regions warning The non-manifold or floating regions warning can be safely ignored. Still, always check the toolpath preview before printing, just to make sure your slicer is not doing anything unusual. This warning appears because the files are built from multiple closed meshes, and some of those meshes share coincident triangular faces so the multicolour geometry lines up correctly. That can trigger a non-manifold warning, but slicers handle it cleanly and it should not affect print quality. The floating regions are also intentional. Most of them are bridges required for the preassembled hinge mechanism, so they do not need supports. ⚠️ About the colour-separated files The files are kept colour-separated on purpose. Most slicers allow you to combine or merge the parts into a single object for printing. If the files were exported only as one single STL, you would lose some slicer control, especially for things like Fuzzy Skin, which makes the stone texture look really nice on monocolour prints too. For Cura: import the parts, select them, right click, then use Merge. If your slicer handles this differently and you get stuck, just let me know and I’ll help you figure it out. +++++++++++++++++++++++ Tinker Junkie presents the WTC tournament style NuGoth Imperial versions of the WTC layout buildings, with the usual Tinker Junkie twist: these are foldable pieces that lay flat once closed. They do not require assembly, they are print-in-place, and if you have a multicolour printer, you can print them in two colours straight away. So it is basically print and play, no hassle. This pack was originally designed for WTC tournament layouts and includes both a boxier WTC-compliant version and a more ruined alternative version for the tall and small buildings, making 4 multilevel ruins in total. If you like the old 10th Edition WTC-style terrain, tall buildings, strong firing positions and compact ruins from which to rain down fire on your enemy models, this is the set for you. Upgrade packs and dedicated 11th Edition foldable terrain are also available separately. ⚠️ Do not leave any 3D printed part in the sun or in very hot environments, like a car in summer. PLA’s glass transition temperature is around 60 ºC, so be careful with your prints if you do not want warping. +++++++++++++++++++++++ Happy 40k games, and good luck on the dice! These files are provided for personal use only and may not be distributed or sold. This license allows for the printing and modification of terrain pieces for personal use in games and displays. Please do not share this files, respect the creators effort by keeping these to yourself. Tinker Junkie is an independent creator and is not affiliated with or endorsed by Games Workshop Ltd. ‘Warhammer 40,000’ is mentioned solely to indicate compatibility.