About this 3D model

A modern fruit bowl that can be printed as separate parts and then assembled by hand. Print Settings Setting Walls 2 Layer Height 0.2mm Nozzle 0.4mm Material Any filament will work (I used marble PLA) Infill 15% Supports No Other Its press fit but if you want it to be permanent then just add some glue inside the edges of the base before pressing the rib in. I recommend to print one base part and then a rib to make sure they fit nicely. Sizing has been tested on a calibrated Bambu X1C and an Ender 3 S1 and for both of those no scaling was needed. You can scale the base size a % accordingly to make the fit more or less tight depending on you specific needs. (don't scale the arms) Note: If there is an interest in different sized base plates/arms or a base plate with more of less slots for the arms let me know and I will add some new versions. The current v1 uploaded version has 28 arms but if you have larger fruit only like apples for instance or similar objects then a version with less arms will work fine.