About this 3D model

Video Preview Expansions List 5/28/26 Stepped Cliffs Curtain Wall We are excited to launch a plateau and mountain system builder that combines the precision of 3D printing with 1" and 2" styrofoam. This versatile system will allow for the creation of virtually any shape. Fully enclosed plateaus with symmetrical designs will be possible, while customizable plateaus can be built starting from the table edge. The 1" foam will also enable the construction of hidden dungeons, using a modified version of our magnet wall system as a 1" booster. The primary goal of this system is to facilitate the creation of large plateaus while adding a sturdy booster system compatible with our extensive collection of Large Cliffs, Mountains, and Apocalypse Buttes. This development serves as a crucial ingredient for scenarios such as "Keep on the Borderlands" and "Caves of Chaos." A key distinction between this system and our riverbanks is its ability to support structures at the very edge of cliffs while ensuring visual harmony with the surrounding terrain. We are currently developing and testing various options to enhance this system. The 2" styrofoam will be particularly beneficial for those creating simple plateau structures. I’ve crafted some shaped components and several 8" styrofoam blocks to explore different applications. The 1" styrofoam will cater to those aiming for more complex plateau shapes. Users can create edges with the blocks and use that outline as a stencil for cutting custom shapes from the 1" foam. The foam will be supported at the correct height using our low-profile dungeon design or the hashtag-shaped supports I’ve developed in 4", 6", and 8" sizes. Images will be included in the set. The Full set consists of 63 parts The main set consists of 26 parts: Straight Sections: 7 piecesEnd Sections: 4 piecesTurn Sections: 2 pieces at 120 degrees2 pieces at 60 degrees2 pieces for 180 to 60-degree turns2 pieces at 90 degrees (out)2 pieces at 90 degrees (in)Section Lengths: 2", 4", and 6"Additional components include: 7 sections with integrated dirt slopes (straights and in-turns)1 giant gradual slope providing 300mm access for full troop movement. 2 smaller slopes6 giant rock sections (4" tall) for visual variety, facilitating a 2" step down and integration with shorter cliffs (straights and in-turns)1 cave entrance, climbing stones, and a low-profile road ramp2 low-profile riverbank integrations (1 from corner pieces,1 from straights) mirror for two sidesCliff integrations for arched stone, straight stone, and wooden bridges Patch 3_15_26 Added size fix and recut for Endblocks 3&4. This fix is not included in the main download. Patch 5_3_26 OpenLOCK bool on one side of 50MM_Cliffblock_90Degree_SquareA and SquareB too shallow and edge needed a recut. 50MM_Cliffblock_90Degree_Corner_DirtSlope and Low River Hub inherited this issue and the fix is also incuded. Entire Data folder reloaded 3_5_26 so no need for patch if you download after this date.