About this 3D model

Slideout adapter plate for IKEA Samla 22l Since I got pretty anoyed of always have to lift out my ikea Kallax to pick filaments into my dry boxes - the Samla 22l is in my opinion one of the best for the buck storage solutions for filament and can hide nice and easy in a Kallax - I decided to design a adapter plate for a pullout for easy acces my boxes. Target was to make it easy as possible so I choose to screw into normal holes in the part. (File for mold in threads will come later) Needed things: flat head screw M3x8mm x8 (ptrobably 1/8" should be close to) some PLA or filament of your choise - PLA fits perfectly a 14" / 350mm drawer slide (like https://www.amazon.com/-/de/dp/B098X86F29/ref=sr_1_8?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=1L5A4RQ5FC2FW&keywords=drawer%2Bslide%2B350mm&qid=1702549550&sprefix=drawer%2Bslide%2B350mm%2Caps%2C152&sr=8-8&th=1&language=en_US or like in my case https://www.teleskopauszug24.de/vollauszug-kv1-25-h35-l350-nf-350-mm.html → it is important to have the distance of 256mm between the vertical holes to fit the right way (see picture). → will work out an extra version with long holes to be adjustable with nuts Installation: Best way to install it is to mount the plates to the slides, place the box onto them, slide fully in and then mark at the needed position for a good alignement.