About this 3D model

An accessory for the Nintendo Switch to hold Switch, Joy-Con, Joy-Con Strap and games. There is 2 versions of files : Version for mounting with screws ; the files have "_screw" extensionVersion for mounting with glue ; the files have "_glue" extension Print SettingsScrew version :1 x BodyBottom_Screw : Layer:0.20mm Raft:no Support:no Infill:20%1 x BodyLeft_Screw : Layer:0.20mm Raft:no Support:no Infill:20%1 x BodyMiddle_Screw : Layer:0.20mm Raft:no Support:no Infill:20%1 x BodyRight_Screw : Layer:0.20mm Raft:no Support:no Infill:20%1 x BodyTop_Screw : Layer:0.20mm Raft:no Support:no Infill:20%1 x DrowerBack_Screw : Layer:0.20mm Raft:no Support:no Infill:20%1 x DrowerFront_Screw : Layer:0.20mm Raft:no Support:no Infill:20%1 x JoyConHolder_Screw : Layer:0.20mm Raft:no Support:no Infill:100%1 x JoyConStrapHolder_Screw : Layer:0.20mm Raft:no Support:no Infill:100%1 x SwitchHolder_Screw : Layer:0.20mm Raft:no Support:no Infill:20% Glue version :1 x BodyBottom_Glue : Layer:0.20mm Raft:no Support:no Infill:20%1 x BodyLeft_Glue : Layer:0.20mm Raft:no Support:no Infill:20%1 x BodyMiddle_Glue : Layer:0.20mm Raft:no Support:no Infill:20%1 x BodyRight_Glue : Layer:0.20mm Raft:no Support:no Infill:20%1 x BodyTop_Glue : Layer:0.20mm Raft:no Support:no Infill:20%1 x DrowerBack_Glue : Layer:0.20mm Raft:no Support:no Infill:20%1 x DrowerFront_Glue : Layer:0.20mm Raft:no Support:no Infill:20%1 x JoyConHolder_Glue : Layer:0.20mm Raft:no Support:no Infill:100%1 x JoyConStrapHolder_Glue : Layer:0.20mm Raft:no Support:no Infill:100%1 x SwitchHolder_Glue : Layer:0.20mm Raft:no Support:no Infill:20%5 x SwitchHolderPlug_Glue : Layer:0.20mm Raft:no Support:no Infill:100% AccessoriesFor Screw version :6 x m3x40mm SHCS6 x m3x10mm SHCS21 x m3x5mm SHCS33 x threaded inserts For Glue version :Glue AssemblyLook at pictures. For screw version, BodyBottom_Screw and BodyMiddle_Screw are fixed with 6 x m3x40mm SHCS.