About this 3D model

Skeletal Acolyte: This model comes packaged in a zip file and includes: A supported version An Unsupported Version the Lychee file (editable supports) A render Photographs The model in the photographs was printed with 60% Epax Hard resin mixed with 40% Siraya Tenacious on an Elegoo Mars 2 Pro using the following settings: Layer height: 0.05mm Bottom Layer Count: 6 Exposure Time: 3 seconds Bottom Exposure Time: 25 seconds Light-off Delay: 0 seconds Bottom Light-off Delay: 0 Seconds Bottom Lift Distance: 15mm Lifting Distance: 12mm Bottom Lift Speed 40mm/min Lifting Speed: 40mm/min Retract Speed: 150mm/min