About this 3D model

A mount for Reolink Go PT Plus with solar panel: https://reolink.com/gb/product/reolink-go-pt-plus/ This model has been designed with clearance to securely fit on the top of an aluminium pole with a diameter of 26.15mm. This was up-cycled from broken shavings forks at horse stables. I can easily produce other models for different diameter poles on request. The solar panel and camera mounts are attached to the model with 4mmx10mm cap head stainless steel bolts into 4mm brass inserts which are hot pressed into it with a soldering iron. Inserts with other dimensions may or may not fit the model. The use of inserts mean that the solar panel and camera mount can be easily exchanged if required. There is an additional hole at the bottom of the pole mount for an identical brass insert. This can be used with another bolt to hold the mount against the pole. In my case this turned out to be unnecessary as the assembly didn't easily turn on the pole. Prints without support.