About this 3D model

Yo, this is mine rendition of CFTKB's Romeo keyboard case. All props go to the creator (https://www.cftkb.com/).Apart from the keyboard kit, you will need (linking examples aka what I used):- M2 incerts 3.1mm by 3.6mm x8 (https://www.amazon.nl/gp/product/B088QJG676)- M2 bolts 15mm or 16mm x8 (https://www.amazon.nl/gp/product/B07SGP8TWS)- M2 nuts x4 (https://www.amazon.nl/gp/product/B07SGP8TWS)- 10mm rubber feet x4 (https://www.amazon.nl/-/en/gp/product/B07HV7HQ98)- A bit of super glue Tips:- Use lower end temps on your soldering iron to melt the incerts into the top border pieces (aka ~180°C for PLA)- Depending on the printer margins, you might need to cut a layer or 2 from the top border pegs. Use an exacto knife or similar and you will be ok.