About this 3D model

This model comes packaged in a zip file and includes: A supported versionAn Unsupported Versionthe Lychee file (editable supports)A renderPhotographs The model in the photographs was printed with 60% Epax Hard resin mixed with 40% Siraya Tenacious on an Elegoo Mars 2 Pro using the following settings: Layer height: 0.05mmBottom Layer Count: 6Exposure Time: 3 secondsBottom Exposure Time: 25 secondsLight-off Delay: 0 secondsBottom Light-off Delay: 0 SecondsBottom Lift Distance: 15mmLifting Distance: 12mmBottom Lift Speed 40mm/minLifting Speed: 40mm/minRetract Speed: 150mm/min