About this 3D model

This is an Intake Manifold remix for the Ford FlatHead V8 engine.This design is planned to receive a supercharger soon. Original engine : https://www.myminifactory.com/object/3d-print-106731 My final project : Release24/03/2020 : New IntakeManifoldPulleyV2 (it replace IntakeManifoldPulley) with deeper groove to prevent the belt from jumping.30/03/2020 : New IntakeManifoldPulleyHolderV2 (it replace IntakeManifoldPulleyHolder) for the correct position of the Supercharger. Print Settings1 x IntakeManifold : Layer:0.15mm Raft:no Brim:no Support:yes Infill:15%1 x IntakeManifoldGasket : Layer:0.15mm Raft:no Brim:no Support:no Infill:100%2 x IntakeManifoldPulleyV2 : Layer:0.15mm Raft:no Brim:no Support:no Infill:20%1 x IntakeManifoldPulleyHolder : Layer:0.15mm Raft:no Brim:no Support:yes Infill:80%1 x IntakeManifoldTop : Layer:0.15mm Raft:no Brim:no Support:yes Infill:30%1 x OilBreatherBottom : Layer:0.15mm Raft:no Brim:no Support:yes Infill:100%1 x OilBreatherFilter : Layer:0.15mm Raft:no Brim:no Support:no Infill:20%1 x OilBreatherGasket : Layer:0.15mm Raft:no Brim:no Support:no Infill:100%1 x OilBreatherTop : Layer:0.15mm Raft:no Brim:no Support:yes Infill:20%1 x OilBreatherPipe : Layer:0.15mm Raft:no Brim:no Support:yes Infill:20% Accessories8 x 4mmx2mm disk magnet10 x m3 threaded insert20 x m3x3mm SHCS10 x m3x8mm SHCS2 x m3x10mm SHCS2 x m3x30mm SHCS6 x m3 washer2 x m3 jam nut4 x 623zz bearing AssemblyLook at pictures. More add-ons https://cults3d.com/en/design-collections/dancan13f/ford-flathead-v8-engine-add-ons