About this 3D model

Wiper Upgrade Adapter Simple After asking myself so often why the nozzle doesn't get really clean, I set to work and designed a small but excellent UPGRADE. It is simple and easy, installed within 5 minutes and works perfectly. It fits perfectly into the poop container and does not interfere with the ejection. You only need the small adapter, a small brush find it here link (Brush 3mm) (possibly you find the same in your country) , the rest is original accessories. I shortened the brush handle to 5mm , you can also make it shorter or leave it as long as you like The installation is very easy, as you can see in the pictures. I have added a small support (probably more for the eye and the conscience). I printed the whole thing in PLA. Now have fun building it. 1. remove the original wiper 2. fix the original screw a little so that screwing it in is easier 3. screw everything together 4. take another screw from the supplied accessories and screw it on a little so that you don't lose the screw in the poop container. 5. install everything, insert the brush and off you go. In my case, the brush was a little loose, so I glued it in place. Then I fanned out the brush head and lo and behold...PERFECT! if there are any leftovers after the print, just pull it out Easy to use, easy to clean If you like it, rate it, share it. THX Have FUN