About this 3D model

MOE AAA & CR2032 Grip Insert by Qwerm An insert for a Magpul MOE grip that holds one CR2032 and three AAA batteries. Print Orientation: Print everything on it's flat side (facing up for the base, facing down for the cap). Settings used: Material: PLA+ Extruder Temp: 210c Bed Temp: 60c Layer Height: 0.2mm Wall Line Count: 4 Infill Percentage: 100% For the cap use the following support: Support Structure: Tree Tree Support Branch Angle: 50 Support Placement: Touching Buildplate