About this 3D model

This is a 5 color print. Created using Hueforge and midjourney. Instructions are for bambu slicer and prusa slicer. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm (used a base layer of 0.24 to provide some extra squish and hopefully reduce the corners lifting. I also threw mouse ears on check 3mf file) Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo red Transmission Distance: 7 PLA PolyLite Orange Transmission Distance: 7.5 PLA PolyLite Lemon Yellow Transmission Distance: 6.5 PLA PolyLite White Transmission Distance: 5 Swap Instructions: Black until layer #11 at 1.04mm red until layer #16 at 1.44mm Orange until layer #26 at 2.24mm Lemon Yellow until layer #34 at 2.88mm White for the rest. Play around with the colors if you like lmk what you think.