About this 3D model

Basket to dry desiccant / silica gel in the Sunlu S4 filament dryer. These boxes fit exactly onto the space over the bearings of the Sunlu S4 filament dryer. Simply dry your desiccant / silica gel at 70°C for a few hours , stir from time to time. I recommend two boxes because air flow is better the less each box is filled. It's mandatory to use a high temperature filament like ABS, ASA, PC or similar! PETG and PLA will not work. I tested PETG and the bottom deformed while using. The holes/slots are 0.8mm wide. No support needed. I used 3 walls and 4 top/bottom layers to get it stronger.