About this 3D model

New Version V2 available: https://www.printables.com/model/445924-stackable-can-dispenser-v2 ------------------- Stackable can dispenser I've uploaded different dispensers: Ø58x115mm (250ml) Ø58x146mm (330ml) Ø67x124mm (355ml) Ø54x134mm (250ml redbull) There is a "short version" of each dispenser so you can print it on a 200x200 bed Edit 2017/03/18: I've uploaded a "short version" of the dispenser. This should fit onto a 200x200 bed Edit 2017/04/07: Added .stl-files for the 355ml cans. I've also uploaded a screenshot so you can see how many 355ml cans fit into the dispenser. Edit 2017/08/22: Added .stl-files for the 250ml redbull cans as requested in the comments. Files are named 250rb / 250rb_short I've only printed the 250ml version but the others should work as well. (Let me know if anybody tested it) I used the following can model in the above renderings: https://grabcad.com/library/coke-can-2012 Print Settings I used Printer: CTC Rafts: No Supports: Yes Resolution: 0,2mm Infill: 15% Notes: If you print the parts with a resolution higher than 0.2mm the cans probably won't roll down.