About this 3D model

so i made a detailed instruction, but got timed out while editing and lost everything. here are the key features: with this thing you can convert your 1/24 losi micro sct to a trophy truck. you'll need 20+ m2 screws and nuts. and also need to sacrifice a stock center driveshaft, have to cut it down to a length for the spur gear assembly. You'll also need 4 pc of 45mm long links like the HK rocksta 1/24 crawlers links and a telescopic driveshaft from some center motor micro crawler. i also uploaded a full model with all parts fitted, as a mockup for you to be able to see how it should look like.. hope it helps. :) feel free to contact me if you have any questions. i'll upload a more detailed instruction later with more photos. Print Settings Printer: creality cr-10 Rafts: No Supports: Yes Resolution: 0.1-0.2 Infill: 10-100% Notes: print the axle housings at 0.1mm layer with 100% infill with support at the bearing grooves. also print the motor spacers at 0.1mm layer you can print the rest at 0.2mm layer with 10-20% infill w/o support. Category: R/C Vehicles