About this 3D model

I made this remix of the original balls by Thather1 for an easier printing. I simply cut downt about the 2/5 of the balls, now it has a flat side, so you can print it without support. Since one side of the balls will be facing towards the back of the truck, it doesn't visible. And i extended the attatching point with a ball shape so with a heat gun or a toutch of a flame you can fit a 6mm to 6.5mm ball end in, for an easier attatching to the car. Also added a file with some adaptors: 40x20mm flat panel with 3mm hole in the middle. 30x20x15mm wide U shape with 3mm hole in the middle. 20x20x8mm U shape with 3mm hole in the middle. This one is designed to fit into the rear bumper of the 1/10 scale Traxxas Summit/Revo/E-Revo You can print the adaptors with the settings you like, but i suggest 100% infill. just drill holes to the adapters to attatch them to your truck. Category: R/C Vehicles