About this 3D model

TL;DR OpenSCAD script for a look alike of the rPLA planters. Collection Motivation https://www.reddit.com/r/prusa3d/comments/18kcz27/comment/kdqpd1v/?context=3 This is the original one and a great idea. You see a pattern bug on the white one and the right one. The rPLAnter OpensCAD code did not have that bug, the code adjust the height and width smoothly to match the pattern size by flooring down. No mater about the pattern or pot size. Let's get started Slice with 0% infill, 0 top layers, as many perimeters and bottom layers as you need. OpenSCAD OpenSCAD is a free and open-source 3D modeling software that is based on the principle of constructive solid geometry (CSG). This means that OpenSCAD models are created by combining basic geometric shapes, such as cubes, spheres, and cylinders, using CSG operations such as union, intersection, and difference. This approach allows for a very precise and versatile way to create complex 3D models. https://openscad.org/downloads.html Attribution © yahbluez Can I sell copies of this? Yes! Yahbluez shared this project under the GNU GPL v3.0 license. This license allows selling copies, but you must provide proper attribution and use the GPL 3.0 license, as detailed in the GPL v3.0 license itself. You have not the right to use any other licence than GNU GPL 3.0. Donation If you like to donate you can use ko-fi or paypal. Money will be spend on filament and beer. Filament used https://www.prusa3d.com/product/prusament-rpla-algae-pigment-1kg/ https://www.prusa3d.com/product/prusament-rpla-wine-pigment-1kg/ https://www.prusa3d.com/product/prusament-rpla-corn-pigment-1kg/ https://www.prusa3d.com/product/prusament-rpla-rissoto-pigment-1kg/