About this 3D model

Summary This is a filament guide for the cr10 v3 that allows the use of bearings to guide the filament into the sensor without much/any friction. I used some flanged bearings I had around. When printing the pins, I suggest you scale it to 98-99% in the slicer to make it fit. You'll have to use longer screws than the original ones to mount it to the metal frame. Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: SUNLU ABS Blue Notes: Print this using petg or abs, I recommend using tree supports, as shown in the picture for painless removal!