About this 3D model

Print Settings: Infill: 100% Layer Height: 0.08mm Base Layer Height: 0.16mm Color Swapping Instructions: Start with Black: Use black filament for the initial layers. Layer #6 (0.56mm): Lava Red At the 6th layer or 0.56mm height, pause the printer and switch to Lava Red filament. Layer #7 (0.64mm): Orange At the 7th layer or 0.64mm height, pause the printer and switch to Orange filament. Layer #12 (1.04mm): Yellow At the 12th layer or 1.04mm height, pause the printer and switch to Yellow filament. Layer #16 (1.36mm): Cold White At the 16th layer or 1.36mm height, pause the printer and switch to Cold White filament. Continue with Cold White: From layer 17 onward, use Cold White filament for the remaining layers. Note: Ensure a smooth transition during filament changes to avoid any artifacts in the print. Additional Considerations: Make sure the printer is calibrated and leveled before starting the print. Use a reliable 3D printing material compatible with your printer. Adhere to proper print bed adhesion methods to prevent warping. Monitor the print closely during filament changes to ensure a seamless transition. Post-process the printed model as needed for a polished final result. Happy 3D printing!