About this 3D model

I designed both the AEG/Rigid 18v Blower Round and Horizontal Nozzles to fit my custom designed and printed blower attachment but they do fit the original extension pipe. They may be a little snug at first but place them on and off a couple of times and they are good to go. My original extension pipe broke the clips off so I designed and printed my own. Printing details Printed using 0.4mm nozzle 0.20mm layer height (15-20% infill) 4 wall loops(min 3) Supports needed: Yes ( only minimal supports needed for the inside connector lugs) (* Using Bambu Studio/OrcaSlicer-I painted manual supports on bottom of each lug overhang and each of the overhangs where the clip is. I used Snug style support to minimise printing unnecessary waste material. See photos samples) Filaments: PLA+, PETG or TPU Print orientation: Standing upright Printed using Bambu Labs X1 Carbon 0.4 Nozzle and Elegoo Neptune 3 Pro & 0.4mm nozzle eSUN PLA+ Black but have also printed in BBL PLA Basic Orange and PETG HF Orange (see material links) I have also created the blower extension attachment which can be found at the link below AEG/Rigid Blower Attachment Adapter Boost Me If you enjoyed this print, a boost would be awesome! If you have any input/ want any changes, feel free to let me know. Thank you!