About this 3D model

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.4mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Orange Transmission Distance: 10 PLA BambuLab Basic Jade White Transmission Distance: 5 Swap Instructions: Start with Black At layer #6 (0.72mm) swap to Red At layer #9 (1.04mm) swap to Orange At layer #13 (1.36mm) swap to Jade White for the rest.