About this 3D model

Update: the V2 model was incorrectly taken down by bambu for having no picture, despite the picture being the main image on this model post. I will remedy this shortly. Update: I have added a V2 version of the model that is printed all in one piece. I have also strengthened the lower fins since they were a bit too easy to break on the original version. There is a coloured and uncoloured version of V2. They are both the same other than one is pre-coloured. You can change the colours of different sections of the model to meet your requirements in the objects view of Bambu studio. I wanted to challenge myself to make something a little bit more out of my comfort zone so I made this playstation platinum inspired trophy. I think it came out pretty well! V1 Notes:: The central column and the sphere print as one piece as a multicolour print. Its slower due to the different coloured symbols on the face of the sphere. I may release a version without the symbols or just debossed symbols to enable a faster print. The silver base prints as one piece. It is possible to customise this with the text tool in bambu studio, I will add a gif to this description in the near future depicting the process. I recommend you deboss using a negative part rather than embossing. IF YOU EXPERIENCE DEFECTS ON THE OUTER WALLS OF THE BASE, SUCH AS ZITS, YOU NEED TO LOWER YOUR FILAMENT TEMPERATURE. I FOUND BAMBU FILAMENTS EVEN WITH THEIR PROFILES WERE A LITTLE TOO HOT.