About this 3D model

This is a wet extractor for use with a conventional canister vacuum cleaner. Among the files you will find two jigs to shape the transparent lid (seeing the water being sucked in gives a lot of satisfaction) for those who can't or don't want to build it, I also uploaded the file to print the lid. The shaping jig is longer than the finished lid, so you have the ability to trim it to the correct angle. I recommend using hot threaded bushings, the classic self-threading bushings due to the quantity (17) of bushings to be inserted, risk damaging the extractor. For the gasket I used a 1.8mm diameter with a length 356mm,hold in place with a few drops of cyanoacrylate glue. The intake of the aspirator is 38mm. The model can be printed without supports, I respected angles that lend themselves well to being printed. As you can see in the images, I added a support in the middle to support the object during the fills which can sometimes be a bit wavy.