About this 3D model

I designed a case to hold both practice "snap caps" or live ammunition. I wanted a box that will take little filament but will securely hold 9mm ammunition for storage. To print this design I used my JG Aurora Maker Magic. I used a 0.4mm nozzle. It is printed using 2 bottom layers and using Vase Mode printing and .02mm layer height. I did set the extrusion to 120% to get a slightly more rigid side. If you do print this or have any thoughts on it please let me know. If there is interest in it I may upload a design for 50 in addition to the 20.