About this 3D model

FILES UPDATED 7/28/24 with thicker black backing - Carvings of the Raven and the Midnight Moon - Set of 3 Bookmarks Please share your prints Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 68.33x205mm in size You may print at higher layer heights below the Min Depth of 0.24mm The Max Depth is 2mm and the Actual Depth is 2mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Tough Gray Transmission Distance: 1.8 PLA BambuLab Basic Silver Transmission Distance: 0.5 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Gray At layer #10 (0.88mm) swap to Silver At layer #14 (1.2mm) swap to Jade White for the rest.