About this 3D model

2-piece, glue-on wheel designed for use with the SCX24. There are three offset options. For reference, the +1mm offset is 2mm closer to the center of the axle compared to the RGT and CR-18/24 0.9" wheels. The 0 and -1 sit further outboard. These wheels mount directly to the axle pin. They DO NOT use wheel hexes. They may fit other models like the CR-24, CR-18, and RGT Adventurer. In my testing with 46mm RGT tires, no glue was necessary and there was no slipping. YMMV. Hardware (per wheel):-1 Offset: (12) M1.4 x 4mm0 Offset: (12) M1.4 x 6mm+1 Offset: (12) M1.4 x 6mmTested to work with the stock SCX24 steering knuckles. The +1 offset will not work with brass steering knuckles, but the other two may. Clearance is tight.