About this 3D model

Nicer result with 2 mm nozzle. Remove the purge lines before printing, otherwise they may be in the model. All lids have a hanging hole. Lid 1 with hole for a cable. Lid 2 with battery compartment and switch, printed in PLA and PETG as support interface. I used M3 threaded sleeves to attach the battery cover. I used these battery compartments: https://www.amazon.de/dp/B0C2Q41DTT?ref=ppx_yo2ov_dt_b_product_details&th=1 For this you need a 5v LED strip and these switches: https://www.amazon.de/dp/B08CY41YT5?ref=ppx_yo2ov_dt_b_product_details&th=1 Lid 3 for a battery compartment with remote control. Just attach the front part a little with hot glue so that you can open it again to change the battery. The remote control works through the front. The lid is intended for this battery compartment with LED strips: https://www.amazon.de/dp/B08QCMFJW8?ref=ppx_yo2ov_dt_b_product_details&th=1 Filaments used: Bambu PLA Matte Black Bambu PLA Matte White Bambu PLA Basic Beige Bambu PLA Basic Brown Bambu PLA Matte Dark Brown Bambu PLA Matte Sakura Pink