About this 3D model

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Silver Transmission Distance: 0.5 PETG JAYO White Transmission Distance: 6 Swap Instructions: Start with Charcoal At layer #3 (0.32mm) swap to Blue Gray At layer #12 (1.04mm) swap to Silver At layer #18 (1.52mm) swap to White for the rest.