About this 3D model

Print profile is made for AMS, if you want to do it manually please use the following : Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyTerra Lava Red Transmission Distance: 1 PLA PolyTerra Sunrise Orange Transmission Distance: 2 PLA BambuLab Matte Ivory White Transmission Distance: 4 Swap Instructions: Start with Lava Red At layer #7 (0.64mm) swap to Sunrise Orange At layer #12 (1.04mm) swap to Ivory White for the rest.