About this 3D model

Warning: This is a very old model I created in 2016 and imported from my Thingyverse profile ( https://www.thingiverse.com/TheZerschmetterling ). Maybe some links are broken or not up to date. If you have any questions do not hesistate to ask. Summary This is a XT60 mount for the Shendrones Corgi. Good to know: It is designed to be printed in flexible material! The plug may already be soldered! It needs to be printed in flexible material to fit inside otherwise it won't because the mold is smaller then the plug. You can use the top side as an anti-slip mat How to print flexible material: There is a Bambu Guide on how to print TPU, i recommend reading this: https://wiki.bambulab.com/en/knowledge-sharing/tpu-printing-guide DO NOT USE AN AMS TO PRINT TPU if its not TPU with a hardness of 77D or 55D! You can print on a Cool plate, PLA plate, engineering plate, high-temperature plate or textured PEI plate, just make sure the temperature is low (30°-35°). Use a 0.4 Nozzle. How to mount it to the frame: Just pull your XT60 inside the flex mount from behind. There is a 1mm edge on the frontside of the mount to hold the plug in position while connecting or disconnecting a lipo Now just slide the mount over the bottom plate of the battery tray. Because it is flex it should fit and sit tight!