About this 3D model

Summary My MPCNC uses dual endstops for auto squaring. Calibrating the positions of the endstops exactly was proving to be a challenge so I made these gauges to simplify the task. You can use the markings on the tool for coarse adjustment or use a caliper for finer adjustment. This tool removes any inaccuracies caused by measuring from the tower tops It does assume that your frame is 100% square to begin with of course. You will need to print 2 of each part for the tubing size you use (23.5mm, 25mm, or 25.4mm). Print Settings Printer: BLV Cube Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 10% Filament: Any Any