About this 3D model

Printing Instructions: Print at 100% infill. Layer height: 0.08mm, with a base layer of 0.16mm. Filaments Used: PLA BambuLab Matte Charcoal, Transmission Distance: 0.6. PLA BambuLab Basic Orange, Transmission Distance: 10. PLA BambuLab Tough Light Blue, Transmission Distance: 3. PLA BambuLab Matte Ivory White, Transmission Distance: 4. Swap Instructions: Begin with Charcoal. Swap to Orange at layer #3 (0.32mm). Change to Light Blue at layer #11 (0.96mm). Finish with Ivory White starting from layer #18 (1.52mm).