About this 3D model

This product includes: - STL files for printing a glowing miniature; - STL files for printing a table lamp; - base for miniature and base for lamp. To make a miniature glow: ● You will need a cable with the diameter not bigger than 0.12mm2 , the battery CR2032 3V and a 3mm led diod. It is better to use a colored diod than a white one. ● Then you have to print a base and a miniature with the color you want. If a color of your photopolymer resin is highly transparent, you have to put some metallic paint inside. Leave the back side of crystals or lava uncovered with paint inside the miniature. ● After this, you have to connect the diod with the cable and put it inside the miniature. Glue the parts of the miniature and put the cable in the battery holder inside the base through legs. If you want to print it as a table lamp: ● you need diod lamp G4, plafond for G4, aluminum plastic tape and cable; ● print body of the golem with FDM printer(using ABS or PLA); ● print translucent part using SLA printer with color you like; ● it is better to make some post-processing of the printed detals. You may need to use some putty(green stuff etc.) to connect all the parts; ● glue the plafond, lay the cable; ● paint lamp; ● cover with aluminum plastic tape places that should not be translucent; be careful with electrisity! we are not responsible for possible incidents.