About this 3D model

RX-0 Unicorn Gundam (Destroy Mode) Miniature3D ModelFor 3D Printing29.12 mm x 18.30 mm x 51 mmTPU FDM Filament on Bambu Lab A1 mini PrinterPrinter: Bambu Lab A1 mini 3D PrinterFilament: FDM TPU Medium Hard (95A) 1.75 mmFilament Dryer: SUNLU S2 Filament Dryer (any generic TPU Filament Dryer @ 60 °C)Slicer Settings: Printer: 0.4mm Nozzle Bambu Lab A1 miniExtruder → 0.7 mm Retraction LengthFilament:210 °C - 240 °C Nozzle Temperature (set to 210 °C)80% Fan Speed0.7 mm Retraction LengthQuality:0.15 mm Layer Height0.2 mm Initial Layer Height0.42 mm Line Width0.24 mm Support Line WidthAvoid Crossing WallStrength:100% Infill (Rectilinear Pattern)Speed:10 mm/s Layer Speed30 mm/s Support Layer SpeedSupport:Tree (auto)Tree Organic Style30° Overhang AllFor3D Slicer Settings:Printer:0.4mm Nozzle Bambu Lab A1 miniExtruder → 0.6 mm Retraction LengthFilament:225 °C Initial Layer Nozzle Print Temperature220 °C Other Layers Nozzle Print Temperature55 °C Initial, Other Layers Textured PEI Plate2.7 mm3/s Max Volumetric Speed1.028 Flow ratio50% Fan speed, 100 s Layer time Min Fan Speed80% Fan speed, 8 s Layer time Max Fan Speed10 mm/s Min Print Speed2 mm Retraction Length25 mm/s Retraction SpeedQuality:0.15 mm Layer Height0.2 mm Initial Layer Height0.44 mm Default Line Width0.4 mm Initial Layer Line Width0.42 mm Outer Wall Line Width0.45 mm Inner Wall Line Width0.44 mm Top Surface Line Width0.42 mm Support Line WidthBack Seam PositionArachne Wall GeneratorInner Wall / Outer Wall / Inner Wall Order of WallsOnly One Wall on First LayerStrength:100% Infill (Rectilinear Pattern) 3 Wall Loops4 Bottom Shell Layers20% Infill / Wall Overlap10 mm2 Minimum Sparse Infill ThresholdSpeed:30 mm/s Initial Layer Speed30 mm/s Initial Layer Infill Speed30 mm/s Outer Wall Speed30 mm/s Inner Wall Speed30 mm/s Infill Speed30 mm/s Gap Infill Speed400 mm/s Travel Speed5000 mm/s2 Normal Printing Acceleration Support:Tree (auto)Tree Organic Style30° OverhangOn Build Plate OnlyRemove Small Overhangs0.1 mm Bottom Z Distance1 Top Interface Layer1 Bottom Interface LayerGrid Interface Pattern-0.1 mm Normal Support Expansion0.4 mm Support / Object XY Distance0.3 mm Support / Object First Layer GapOthers:No Reduce Infill Retraction Additional Notes:- Super dry TPU filament improves quality and reduces stringing significantly.