About this 3D model

This is a 1:1 replica of the Finnala couch legs from Ikea. Minimal supports needed. Printed with PLA +, and uses cheap off the shelf bolts found at the local hardware store. 70MM M8-1.25 hex bolts are all that is needed if using the press-fit model. This model has the tolerances toned down to allow the bolt to be pressed in place with a vise. The other model that is included is the bolt on version which requires a corresponding washer and nut. Nut works with the default assembly wrench provided with the couch. Bolts: https://www.lowes.com/pd/Hillman-8mm-x-70mm-Zinc-Plated-Coarse-Thread-Hex-Bolt-2-Count/999996400 Nuts: https://www.lowes.com/pd/Hillman-8mm-x-1-25-Zinc-Plated-Steel-Hex-Nut-4-Count/999996406 Washers: https://www.lowes.com/pd/Hillman-6-Count-8mm-Zinc-Plated-Metric-Flat-Washers/999996412