About this 3D model

Was looking over the web to find one for my son's bedroom. Didnt find any that i like so i decided to make one myself! :P TWO VERSIONS:One with a clear spiral beamAnother one with a lithophane beam (with people inside)For the lithophane, it is in two parts. See pictures. ;)It is a reverse lithophane (graphics are inside) so dont be surprised with this detail! ;) Everything prints without supports. 100% support free. Easy to print.You will need:-LEDs. I used a LED STRING which is easy to shape in place.-M3x10mm screws (4x) INSTRUCTIONS:-Visual Assembly instructions included (see pictures).-Do the assembly of the printed parts first (image "step 00") andthen go to the wiring instructions ("step 01" to "step 04").-Feed the String (LEDs) through the base, then the cone and the bottom of the UFO before anything else. Once done, follow instructions from step 01.-If you choose the lithophane assembly, follow the instructionsrefering to this specific part. If you have any question, you can message me here or on my facebook page: https://www.facebook.com/PA1MAKER