About this 3D model

A design challenge for ‘finger toys’ - this was my first thought, so I went for it. Made up a little pack of finger-puppet-accessories - to tell small and fun stories for your kids. Have fun Overview All items are designet to be quick and easy to print - without supports! The pack includes the following items: Tophat (for classy occasions) Cap (more casual wear) Construction Helmet (for all workers out there) Party Hat (for those extra joyful days!) Sunglasses (for sunny days? or just to look cool!) Tie (and one more for the classy occasions) Do you like the kit, but miss a specific item , then please leave a comment - I’ll try to add more items to the pack if possible :-) Everything is made for a finger size of 15 mm in diameter - but can easily be scaled up/down in the slicer to fit your needs! Scale to fit Just print 1 item in a single color, and afterwards scale up/down and use the good trial/error until you find what you need! Or use math :-P See the table below: Diameter Scale 12 mm 80% 13.5 mm 90% 15 mm 100% 16.5 mm 110% 18 mm 120% 19.5 mm 130% Assembly Nothing. Just print and put on your finger tips for a little fun storytelling time! Print instructions They print like any other small item. But a few tips: Orientation : Everything should be oriented correctly right from the start - just import and print! Supports : No - not needed. Speed : Maybe slow things down a little - they are quick to print anyways! Happy printing! Want to show your support? You can see all my designs on Printables - and you can become an active supporter. I would really appreciate it! https://www.printables.com/@GlennovitS3D