About this 3D model

Boost Me Give me a free Boost if you Like ! IF YOU LIKE THIS MODEL GIVE ME A “THUMBS-UP” SO MORE PEOPLE CAN DISCOVER THIS MODEL. THANKS DO NOT PRINT IN PLA DUE TO LOW HEAT RESISTANCE V2 Out Now! (13.01.2025) Whats New: - Fitting Tabs Rounded - Reduced the Infill to 17% for better Airflow - Relocated Fitting Tabs for easyer install - Fitting Hook included for installation Help - Added an Installation Foto Guide This is my lovely Aux Fan Grill Cover Honeycomb Style. Locate the Space for the Grill to Fit in 2. Slide in the two Tabs into that Space. 3. Hook in the Tool near the left Tab 4. Slightly bend in the Tab while pulling on the Hook. 5. Done! STL DOWNLOAD ONLY: - Do not print with thicker Layer than 0,2. This can cause to make it more difficult bend the tab in. - No Top and Bottom Layer - 17% Infill Honeycomb - 4 Walls DO NOT PRINT IN PLA DUE TO LOW HEAT RESISTANCE I did this Perfect fitting Auxilary Fan Grill to match my Toolhead Fan Grill and the Motor Cover. ( https://makerworld.com/de/models/114352#profileId-122922 ) ( https://makerworld.com/en/models/171078#profileId-187811 )