About this 3D model

This is a cap cover for the Type 2 connector for Zero Motorcycles. I designed this to cover the Type 2 electric connector inside the motorbike. After the first test, I decided to add a small hole to simplify extraction because it is extremely adherent to the connector and would be difficult to remove, as the cap creates a vacuum. This is my first version of the cap, and I plan to make more versions to further simplify extraction. I have included a retention cord with a ring to secure the cap using a Torx 20 screw, which you can find inside the charging port. I printed this part entirely in TPU A85, and it took approximately 6 hours to print. You need to orient the part with the top on the print bed. You can find 4 different files: 3 with text and 1 without text. senza scritta: without text scritta Type 2: with Type 2 text scritta Zero SR/S: with Zero SR/S text scritta Zero SR/F: with Zero SR/F text To better highlight the text, you can use a fine-tip marker to color it in WARNING BE CAREFUL NOT TO INSERT THE CAP FULLY, OR IT MAY BE DIFFICULT TO EXTRACT. INSERTING IT HALFWAY IS SUFFICIENT I hope you enjoy this part and find it useful. Happy printing Print Settings Printer: X5SA 24v Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament brand: Azurefilm Filament color: black Filament material: TPU A85 Notes: Bed Temperature: 50°C just for the first layer Nozzle Temperature: 225°C Fan: 100% from layer 1 Print Speed: 15 mm/s Printing Time: around 6h ORIENT THE PART WITH THE TOP ON THE BED