About this 3D model
Update 28-03 Added name plate holders in 5 different sizes. Added grip rings in 3 different sizes. 22-01 Added bottle holders in 6 different sizes. Added spool holders in 3 different length. 19-01 Added shelf buckets in different sizes. Added Pliers holders (3 sizes) facing upwards Added Pliers holders (3 sizes) facing downwards Added straight hook for hanging up small things (70/54mm) Added small hooks 17-01 Added new insert types Added new plate for Shelfs in different length Added new plate for different pegs NOTE: The pegs might have a tighter fit depending on which filament is used. If you find them to tight, slightly trim the edges of the pegs with a sharp knife. If you find them to loose, cross-cut the edges of the peg with the filament cutter to create a smal indent, creating more friction. This is a collection of essential tools for 3D printing, all organised on the HSW (Honeycomb storage wall), originaly created by RostaP . Please see the printing profile for the correct settings. Only adjustment that you could do is to remove the second (top right corner) default purge line to give the grid wall a bit more space. This can be done in the startup G-Code ( please be carful ) Other than that each plate and STL has the optimal print settings pre-configured. Base plate The base plate with maximum printable size for the X1C, P1S, P1P, A1 of 252x224 mm. For optimal printing, please consider removing the top right purge line from the startup G-Code. ( please be carful with altering startup code! if you don't know how to do this just leave it as is. ) Basic set of inserts This is the basic set of inserts that you could use for a single wall. It contains the: Corner inserts, either taking a 3.5mm screw or double sided adhesive tape Covers for the corner inserts Standard open inserts for holding accessories and pegs Collection of additional inserts This is a set of different inserts that can be used to either connect multiple baseplates or different fixtures for accessories. 2 way inserts 3 way inserts 2 way inserts with M3 bolt mount single insert with M3 / M4 bolt mount 90 degree hook Cover inserts for decoration Basic accessory set This set gives you mounting brackets for the commonly used 3D printing tools such as 3DLac adhesive spray bottle Revell glue De-burr tool Filament cutter Bed scraper (For textured plates) Bed scraper metal (For smooth plates) Shelfs A set of shelf in different length 56mm 97mm 122mm 178mm Collection of pegs This will be a growing collection of pegs that can be inserts into the wall inserts. Please check from time to time as i'll be creating new pegs and adding them here. Wedge pegs Angle pegs Pliers (down) 1/2/3 Pliers (up) 1/2/3 Hooks (thick: single, double) (thin) Shelf Buckets A set of different shelf buckets, both enclosed and open front on different sizes 60mm 160mm 210mm Bottle bins and trays A set of bottle holders in different sizes including a 100mm strong plate. Tree support is added where needed. 20mm 30mm 40mm 50mm 100mm 100mm double mount Spool holder A set for mounting spools in 3 length. Tree support is added where needed. 91mm 132mm 173mm Name labels Easy yet usefull addition to the Honeycomb Wall Storage system. Available in 5 different sizes 30mm 40mm 50mm 60mm 100mm Grip rings Useful for gripping round objects. Each is 1mm smaller in diameter than the usual objects, adding extra grip. Also you can choose between a narrow and a wide angle opening. 19mm 29mm 39mm Enjoy!.