About this 3D model

Mules you’ll receive:– Bard– Miner– Traveler– Warrior– Dead– UnloadedMules are not pre-supported! You can resize the files if you want a smaller (or larger) sized miniatures in your game, these files aregood to 28-32mm miniatures without changes. You need supports to print these miniatures, we have printed these models at 80-micron and 120-micron layer height, 15 percent infill and 195 C with PLA using a 0.4 mm nozzle (Ender3 pro). These numbers may vary based on your printer and the material you use. Our support setting in Cura:Support Placement: Touching Build plateSupport overhang angle: 80Pattern: Zig Zag And you’ll need a 6mm brim around the model because legs will release the build plate without it. Models will be 3.5cm long and around 3 cm high in print.Set the seed to 30-35mm/s to get better results.