About this 3D model

See below for important print settings. Inspired by the basalt stone columns located in southern Iceland, this planter features a stone-like texture that captures the natural beauty of Reynisfjara beach. This planter also features a two-part system, including a removable pot with drainage holes and a base with a built-in water drainage reservoir. Thanks to the ample drainage, this planter is suitable for any small succulent, cactus, or other houseplant. The pictured prints were done with Bambu Matte Light Gray filament. SIZES: Pot (Interior Dimensions): -Small: 3"L x 3.5"W x 3"H -Medium: 4"L x 4.5"W x 4"H -Large: 5"L x 5.5"W x 5"H with Base: -Small: 5.5"L x 5.5"W x 3.5"H -Medium: 7"L x 7" W x 4.5"H -Large: 9"L x 9"W x 5.5"H My Print Settings: 0.2mm layer height Fuzzy skin enabled ( Use these settings to ensure a good fit between the pot and the base) Point Distance: 0.4mm Thickness: 0.15mm Ironing on all top surfaces 10% gyroid infill 3 walls This model is not for commercial use. If you are interested in selling your 3D prints of my models, please refer to my Patreon! If you like this design, consider leaving a tip! I'm a university student that designs planters on the side, so anything helps! https://www.paypal.me/theprintedplanter