About this 3D model

Hinged box: This is a great storage solution for small things. A hinged box print in place , in 1 piece . There are 2 print profiles, 1 for the box and 1 for the hinged insert tray. It's not mandatory to print the hinged insert tray, it's an option to complete the box. The box has a closing mechanism and clicks the bottom and top part together. Simple to print model Low cost print No assembly for the box Great organizer for small things: medicine, fishing stuff, small bolts, … Dimensions for the box: Width: 40 mm Height: 17 mm for top and bottom, 34 mm in total when closed Length: 60 mm Guide for the box: Select the print profile for the box When you printed the box, please let it cool down completely Gently start moving the lid towards the bottom part to start movement The hinges are very strong and you can open and close the box hundreds of times without any problem Assembly guide for the hinged insert tray: Select and print the print-profile for the ‘hinged insert tray’. The parts will be printed by object Check the picture below for assembly Check the 2 rear swing arms, there is a right and left one. The front arms are the same. Just gently click them in place. I used a piece of double sided tape to hold the tray to the box Print time and used material: For the box: Print time: 40 minutes PLA filament, approximately 25gr For the hinged isert tray: Print time: 30 minutes PLA filament, approximately 11gr If you find my model useful, please like :-)