About this 3D model

If you want to support my work, you can buy me a coffee here :) https://www.buymeacoffee.com/craycray When I needed to clear a jam it felt like unneccesary work to remove screws, so I added a magnetic mount instead for easy removal. Everythign else is the same, so all other remixes/attachments/extensions works as well. It requires 4 pieces of 3x6mm magnets, I used these: https://www.amazon.se/dp/B07D33PG7Y I've added a complete set and separate profiles for the mount only, one with the holes added and another one if you want to add holes yourself for other size magnets. Update 2024-01-06: Added a custom adapter with fixed angle and wider opening, if you have problem with jams or finding the right angle, use this one instead. This mount replaces the “mount + first” model, so it's an all-in-one which fits the original extension pieces. Profile name: Magnetic mount/first chute (Custom adapter) - 0.2mm layer, 2 walls, 10% infill Update 2024-01-07: Added print profiles for both the standalone mount and the all-in-one custom adapter, with support for captive magnets. Update 2024-01-19: Made a version 2 with a cleaner look and adjusted the angle a bit. Also removed the original “first chute” since it's a bit tricker to get the angles right. Still works with the same extensions. Far from perfect, but i'm learning :)