About this 3D model

No supports needed. Around 30% infill and 4 walls should be sufficient. I recommend using at least PETG though PLA-Plus may work too. Should the focus ring be difficult to turn after assembly, screw in the Tairs focus limiter screw a bit more or move the grip back slightly. You will need the following material for assembly: - 2x bolts M5x20 or M5x25 - 2x bolts M4x10 - 2x nuts M5 - 2x heat inserts M4 (Model is scaled for Ruthex) The bolts should be button, truss or pan head.