About this 3D model

Update 21/02/26: Apologies this one slipped through the net. This should of been an STL version waaay before now.in anycase there is now all 14 of the joysticktop set 2 variations that were previously locked behind my Patreon. ... Here is my second set of replacement arcade joystick tops (and skirt) that I have designed to work with your standard Sanwa type joystick, that have a screw thread. They are push on to fit and don't require screwing. This set has more of an emphasis on BIG. JST_BIGball (71x71 vs 35x35), JST_BIGdome being like the previous but cut into half and JST_capsule being like two normal ball tops stacked up. Also included is the biggest wave skirt which is a disc replacement but with more... flare. I have tested them with a variety of different Sanwa clones and the fit varies but only a little, a first time fitting can be a little fiddly but they also don't come off easy so I see that as a good thing. Mind you don't trap your fingers between the top and your control board when the blighter suddenly drops on. MY PATREON & PATREON SHOP.patreon.com/3DFreeman Thanks for checking out my designs.